[MOQ 3 Roll] TPU-SILK(SILK-Textured TPU) 3D Printer Filament 1KG
Rigid and Flexible
1. Speed recommendation:
Near-end extrusion: within 50MM/S with retraction, 60mm/s without retraction.
Distal extrusion: within 20MM/S without pumping back, 30mm/s without pumping back.
2. Slicing suggestions:
Pursuit of softness: no filling, wall thickness control at 0.8mm~1.2mm for best effect.
Pursuit of elasticity and hardness: open filling to 5 ~ 15%, wall thickness greater than or equal to 1.2mm
3. Flexible adjustment: flexible supplies cooling curing time is slower, the larger the model size, the speed of the print can be increased to the recommended print speed of 10mm / s
4. Flexible silk consumables are not suitable for printing some hollow and have too much overhanging structure of the model
5. Not suitable for printing over the higher size models, the higher the size, the top structure will appear nozzle cuts, wobbling
Rigid and Flexible
1. Speed recommendation:
Near-end extrusion: within 50MM/S with retraction, 60mm/s without retraction.
Distal extrusion: within 20MM/S without pumping back, 30mm/s without pumping back.
2. Slicing suggestions:
Pursuit of softness: no filling, wall thickness control at 0.8mm~1.2mm for best effect.
Pursuit of elasticity and hardness: open filling to 5 ~ 15%, wall thickness greater than or equal to 1.2mm
3. Flexible adjustment: flexible supplies cooling curing time is slower, the larger the model size, the speed of the print can be increased to the recommended print speed of 10mm / s
4. Flexible silk consumables are not suitable for printing some hollow and have too much overhanging structure of the model
5. Not suitable for printing over the higher size models, the higher the size, the top structure will appear nozzle cuts, wobbling
Description
Rigid and Flexible
1. Speed recommendation:
Near-end extrusion: within 50MM/S with retraction, 60mm/s without retraction.
Distal extrusion: within 20MM/S without pumping back, 30mm/s without pumping back.
2. Slicing suggestions:
Pursuit of softness: no filling, wall thickness control at 0.8mm~1.2mm for best effect.
Pursuit of elasticity and hardness: open filling to 5 ~ 15%, wall thickness greater than or equal to 1.2mm
3. Flexible adjustment: flexible supplies cooling curing time is slower, the larger the model size, the speed of the print can be increased to the recommended print speed of 10mm / s
4. Flexible silk consumables are not suitable for printing some hollow and have too much overhanging structure of the model
5. Not suitable for printing over the higher size models, the higher the size, the top structure will appear nozzle cuts, wobbling
